Fire Detection & Suppression (NFPA 72 / 2001)
This course covers the installation, testing, and maintenance of fire alarm and clean-agent suppression systems in data-center environments. Content is built directly from NFPA 72 (National Fire Alarm and Signaling Code) Chapter 10 (Fundamentals), Chapter 12 (Circuits and Pathways, including Class A/B designations and pathway survivability), and Chapter 17 (Initiating Devices), together with NFPA 2001 (Standard on Clean Agent Fire Extinguishing Systems) requirements for total-flooding agent concentration, pre-discharge alarms, and lockout valves in occupied electrical spaces. Students mount and terminate initiating and notification devices, wire and test Class A and Class B signaling line circuits, program and commission a fire alarm control panel, and inspect a clean-agent total-flooding system for a raised-floor data hall. The course maps directly to the NICET Fire Alarm Systems Level I content domains — installation, maintenance, and submittal/layout literacy — and prepares students for supervised Level I work-history documentation. VESDA-class aspirating smoke detection is introduced as the pre-action standard for white-space early warning.
What you'll be able to do
- Mount and terminate initiating and notification devices on a fire alarm training panel per manufacturer instructions.
- Wire a signaling line circuit in a Class A configuration and verify single-open fault tolerance per NFPA 72 Chapter 12. Safety-critical
- Program a fire alarm control unit to activate notification appliances within the NFPA 72 required response window. Safety-critical
- Perform periodic testing of initiating devices and notification appliances per NFPA 72 inspection and testing procedures.
- Diagnose and replace an impaired or deficient initiating device identified during system testing.
- Read a fire alarm shop drawing to determine device type, quantity, and location prior to installation.
- Calculate the minimum clean-agent quantity for a total-flooding hazard volume per NFPA 2001 design-concentration requirements.
- Inspect a clean-agent total-flooding system for pre-discharge alarm, lockout valve, and warning-sign compliance in an occupiable space. Safety-critical
- Configure an aspirating smoke detection (VESDA-class) unit for early-warning coverage in a raised-floor white-space zone.
- Practice job-site safety procedures during fire alarm installation work per NICET Level I safety requirements. Safety-critical
- Document an inspection, testing, and maintenance report suitable for the authority having jurisdiction.
- Distinguish pathway survivability levels and select the correct level for a fire alarm circuit routed through a critical facility.
Train the team that runs the factory.
The Institute travels with every SAVRN campus.